[SOLVED!] Setting up Custom RGB LED in LEDBlinky (setting up for future update)

Has anyone figured out an easy way to setup the thousands of games to light up the active play buttons for those of use with control panels with LED lighting?  I have tried the RocketBlinky app included on the drive but still seem to have trouble.

Hi, Control4reak, Glad to know I'm not the only one with a control panel

You're best bet is to not allow hyperspin to control LedBlinky.

To do this: Open HyperHq and mark Ledblinky: disabled. Then open RocketlauncherUI and go to: 1) Global --> General Settings --> Third Party (Tab) --> LEDBlinky --> Define the path to your LEDBlinky.exe
2) Global --> Main Settings --> LEDBlinky --> Enabled --> All

Run the LEDBlinky Configuration app (LEDBlinkyConfig.exe). From the "FE" menu, select Other. By doing this you're allowing Rocketlauncher to control LedBlinky which does a better job than Hyperspin. I'm of course assuming from your post you have ledblinky working but not well with RocketBlinky.

Anyone working on getting ledblinky configured on the drive? I'm just setting up a new cabinet and am adding led buttons, would be awesome to have this configured on the drive.

Note,

The MAME setup has a controls file that SHOULD work for most games and it'll highlight the buttons used and on some games even say the function if you have the announce feature on. That's not something we did, it's something that LEDBlinky uses a controls.dat file and is a HyperSpin community project. Our group has a few users implementing setup into our drive though.


There's a couple users working on this.  When we have something that has a lot configured, we'll add it to a future update.



FYI Marking this post solved, this doesn't mean that we will not continue to help with this issue. Moving this because the above will solve this issue 99% of the time and help other users; so we want to get it to the SOLVED section. If you are still personally having the same issue, please continue to post in this thread and we will continue to assist if we can; the moving of the post is to help others, it doesn't mean we are ending viewing this thread.